Firestone PondGard EPDM 45-mil Liner

Payment and Return Information - Please Read This First!

TO SEE ITEMS/PRICES PLEASE CLICK THE LINKS ON THE LEFT FOR A LIST OF OUR DEPARTMENTS
WE DO NOT LIST EVERY ITEM WE HAVE ACCESS TO, SO PLEASE SEND AN EMAIL TO TERRIE IF YOU DO NOT SEE
YOUR ITEM LISTED ON OUR WEB SITE. I WILL GET BACK TO YOU WITHIN 24 HOURS WITH A PRICE FOR THE
PRODUCT AND SHIPPING. PLEASE BE SURE TO INCLUDE YOUR ZIP CODE SO I MAY DETERMINE SHIPPING

CLICK HERE FOR ADDITIONAL ITEMS WE CARRY

Please Enter your Telephone Number during checkout

The weight for each size of liner is posted for that size, so please be sure to have help on hand for heavy shipments. On shipments by truck please understand that the drivers are not responsible for off-loading the liner. The liners are heavy and we suggest having someone to help with the larger sizes, even if it means they help you roll the liner off the truck onto the ground. This is not our policy but the policy of the trucking companies all over the USA, so understand that some will help and other's will not, and there is nothing at all that we may do to force the truck driver to help you with the liner.

Click here for Liner 5.5 to 25 feet wide

Click here for Liner over 25 feet wide

Click here for Liner Accessories (Tape, Patches, etc)

At Direct 2 U Pond Emporium we select only the finest products, and sell at the lowest possible prices. You won't find a lot of extra pictures here, only those few pictures needed to show a product... but you WILL find extremely good prices! (No, there are no pictures of EPDM on our store... how do you take a picture of a flat piece of black rubber?)

Special Order EPDM Liner
PondGard 45-mil Liner is the normal stock item at the warehouse
By Special Order Only we are able to offer 1 other EPDM product

For special order items, send Terrie a note tkaufman@pacifier.com with your location (for shipping cost) and the size and type of Special Order Liner you need

Most items are shipped from our Supplier's Warehouse in Tennessee, so you may estimate UPS Ground shipping time from that State

Also please remember that our office is in Washington State, so allow for the time difference if you need to call for information

A Special Note on How to Make a Good Seam Between Sections of Liner
  1. Start by cleaning off the light dusting of "anti-stick powder" with a non-additive petroleum distillate, such as Coleman Camp Fuel (aka "White Gas" but NOT gasoline from an automotive pump, which has additives) (be sure to read and carefully follow the "handling and use" warnings on the can) WARNING - petroleum distillate is FLAMMABLE - NO SPARKS OR FLAME!
  2. You will clean both sections of the liner, an "inner" and an "outer" part, where the two sections are to be joined
  3. Apply Tape Activator according to the instructions on the can
  4. Make sure the liner is PERFECTLY FLAT for a good seam
  5. Apply double-sided splice tape to the liner "part A" of your new seam
  6. Apply the "part B" liner to the other side of the double-sided tape
  7. Clean the "outside" edge of your new seam (do not over-apply the solvent, you don't want the solvent to seap into the seam and loosen the tape) WARNING - petroleum distillate is FLAMMABLE - NO SPARKS OR FLAME!
  8. Apply Tape Activator to the new "outside" edge of your new seam
  9. Apply the 6 inch wide cover tape to the new seam, 3 inches of tape on either side of the external line between the sections
A Special Note on "EXTRA WIDE" Liner Sizes Lap Sealant is a black, rubber based caulk (in a standard caulking tube) used for sealing edges, such as where liner and decorative rocks merge

Tape Activator is a primer, to be used before adhearing seam or cover tape to rubber, to "prime" the rubber surface for better adhesion.

The 3 inch tape is double sided, used BETWEEN layers for seams. (see Tape Activator)

The 6 inch tape is single sided, used OVER layers to protect seams. (see Tape Activator)

The Patch Kit has 2 each 6" x "6 pieces of cover tape and 1 scrubber pad. The 6x6 cover tape is sticky on one side.

To clean the Liner, use a scrubbing pad with non-additive solvent like Coleman Camp Fuel (of course, no smoking or open flames!) to clean the surface of the rubber to get ready to apply the tape activator and splice or cover tape.

Bonding Adhesive is used to attach the liner to a solid surface, such as decking

To place an order, or for more information about any of these items (or about shipping your order), please send me a note! tkaufman@pacifier.com

Payment may be made by Credit Card (using PayPal), Check or Money Order. If you pay by check, please allow an extra 10 working days for your check to clear through my bank. Non-US orders MUST be paid by Credit Card or International Money Order, made out in US Dollars.

The weight for each size of liner is posted for that size, so please be sure to have help on hand for heavy shipments. On shipments by truck please understand that the drivers are not responsible for off-loading the liner. The liners are heavy and we suggest having someone to help with the larger sizes, even if it means they help you roll the liner off the truck onto the ground. This is not our policy but the policy of the trucking companies all over the USA, so understand that some will help and other's will not, and there is nothing at all that we may do to force the truck driver to help you with the liner.